Look for the red or black universal heads that have a 10mm reverse-thread nut, the same as in the photo on this page. Or buy the same one from eBay Australia that I bought that was cheap and delivered in a reasonable amount of time.
These are usually around A$10 to A$15, quite often delivered from China (even if eBay says from Australia).
Installation is the same as the original head. You can find instructions on ManualsLib.com but basically you will need to lock the head into place with a pin and then you can unscrew the old one and screw on the new one. These are reverse thread so turn clockwise to remove and anti-clockwise to install.

Rate this post:
Comments
There are no comments yet. Be the first to leave a comment!